THE MOST SECURE MOUNTING FOR YOUR METAL ROOF
With our GP6 system clips we offer the right product for every metal, whether aluminium, stainless steel, titanium zinc, copper or steel. Due to the general building authority approval (Z-14.1-622) and the MPA test (130360), wind load calculations according to DIN EN 1991-1-4 can be prepared for your project.
The calculated wind load calculation based on the DIBt and MPA tests even takes into account an installed photovoltaic system.
- Clip system with DIBt and MPA test certificates
GP6 SYSTEM CLIPS
The most secure mounting for your metal roof
Technical informations about the GP6 system clips and the types of anchorage.
FACTS & BENEFITS
The GP6 system clips is available for all types of profiles. The GP6 fold clips for double standing seam profiles and GP6 weld attachments for the roller seam welded standing fold & angular standing fold profile.
Types of the GP6 system clips
for double standing seam cover / GP6 seam clips
for angel standing seam- and standing seam cover / GP6 welding clips
Solid wood or wood formwork / direct anchorage
Prodach system rail / direct anchorage
Foamglas claws plates / direct anchorage
Puren metalroof element / direct anchorage
Puren livingboard / direct anchorage
on kind of anchorage with plates / indirect anchorage
With our GP6 system attachment you can attach the metal panels on any fixing surface, whether directly attached or indirectly attached.
Anchorage types of ours GP6 clip systems
Solid wood & wood formwork (direct anchorage)
Prodach system rail (direct anchorage)
Foamglas claws plates (direct anchorage)
Puren metalroof element (direct anchorage)
Puren livingboard (direct anchorage)
on kind of anchorage (indirect anchorage)
The wind load calculation with our GP6 system attachment is based on an installed photovoltaic system on the metal folds.
Due to the low tongue thickness of just 0.15 mm, there is almost no capillary effect on the metal folds.
The tested systems from the metal track over the attachment to the anchoring base allow us attachment distances of up to 1400 mm.
The GP6 attachments achieve a surface load of 1.57 kN with an attachment spacing of 80 cm and a width of 660 mm.
Due to the 200 mm sliding area of the GP6 attachment, the length of the panels can be mounted with 30 meters without a cross fold.
The tested GP6 attachment system is the first on the market with a general building approval Z-14.1-622.
Wind load calculation on the basis of DIBt & MPA tests to DIN EN 1991-1-4.
WIND LOAD CALCULATION
Our clip system for roofing consists of GP6 system attachment and the corresponding screws and fasteners.
The DIBt & MPA tests were carried out according to contemporary building technology standards from the substructure through the GP6 System Brackets through to the metal panels. The test values provide a perfect basis for a wind load calculation according to DIN EN 1991-1-4.
- Wind Load Calculation considered photovoltaic facility
Due to the high extension values of our GP6 system clips, a photovoltaic system (solar system) is always included in our wind load calculation as per DIN EN 1991-1-4. The installation is carried out with clamps directly on the fold.
When assembling the solar system, it does not matter whether the clamps are mounted directly on the GP6 system clips or in the free space. It also does not matter if an installation takes place at a later date.
- penetration free mounting on the metal seams
GP6 system clips
Rules of Plumbers
Protectum GP6 system clips in use at specialist laying companies.
Angle standing seam / Secondary school in Ebersberg
Standing seam / Centraal Station Rotterdam
Double standing seam / Private house in Eichenau
Double standing seam / Private house in München
Double standing seam / Nursery in Coburg
Double standing seam / Hotel Lindner in Bad Aibling
Angle standing seam / Private house in Rosenheim
Angel standing seam / District office in Landsberg at the Lech
Angle standing seam / Private house in München
Then just contact us, we look forward to your inquiry!